Rubber Wheels Google+

Rubber Wheels

Our line of rubber tread wheels offers an extreme degree of versatility when it comes to moving and protecting your products, and have a capacity of 150 to 3,630 lbs. Some of the most economical and rugged rubber wheels can be found in RWM's product selection. Whether your application requires towing and durability, a cushioned ride or floor friendly non-marking treads these rubber wheels will answer the call.

Soft Rubber Wheels (SR) 150-200 lbs.

RWM Soft Rubber Wheels are a good choice for those applications where the average load is light with occasional loads using the full capacity of the wheel. Soft Rubber Wheels are manufactured of quality materials with a resilient rubber tread bonded to the hard rubber core. These rubber wheels are an economical choice for moving equipment.

Soft Rubber Wheels offer floor protection but can leave black marks on floors. Soft Rubber Wheels wear on rough surfaces and can become brittle if left outdoors, exposed to the elements. Economical in smaller sizes, soft rubber wheels become more expensive in larger sizes, especially when premium rubber material is used.

Temperature Range: -40 to +120° Fahrenheit

Hard Rubber Wheels (HR) 250-280 lbs.

RWM Hard Rubber Wheels are used where low cost, easy rolling wheels are required. Hard Rubber Wheels offer good floor protection, are quieter than steel wheels, and are strong and chip resistant. Hard Rubber Wheels have a center line located in the middle of the tread. This center line, even when removed as close as possible, can cause damage to soft inexpensive floors. Hard Rubber Wheels can become brittle over time, and more so when exposed to outdoor elements. Hard Rubber Wheels can crack when dropped from limited heights or subjected to impact or shock.

Temperature Range: -30 to +160° Fahrenheit

Performance TPR Wheels (RP) 190-600 lbs.

Performance TPR Wheels are specially engineered to provide unsurpassed durability and reliability. This premium wheel combines the durability of a hard tread wheel with the quiet floor protection of a soft tread wheel. They are made of a thermoplastic elastomer that is permanently bonded to a polypropylene core and will not mark floors. The Performance TPR Wheel is resistant to chemicals, acids, bases, alcohols, salts and steam. This attractive wheel accommodates a large number of industries and a limitless number of applications such as hospitals, schools, restaurants, factories, warehouses and shop floors.

The RWM Performance Wheel is made to 70 Shore A. This hardness provides all of the benefits of a soft rubber wheel while additionally providing the lowest breakaway force and minimal force to pull results. Performance Wheels are extremely resilient and easily rolls over debris and uneven surfaces.

These wheels are becoming very popular in institutional, food service, retail display and all types of industrial and manufacturing environments. Performance wheels are available in both flat and round treads. The flat tread provides maximum load surface while the round tread provides easy turning.

Temperature Range: -45 to +120° Fahrenheit continuous, 180° Fahrenheit intermittent

RWM Signature™ Premium Wheels 225-700 lbs.

The RWM Signature™ Premium Wheel has a lightweight, reinforced nylon core with a high strength non-marking elastomeric rubber tread. The round tread provides easy rolling. Our durable nylon core is six times stronger than polypropylene. The performance rubber tread is cut, tear and corrosion resistant and will not chunk out. It has the highest strength-to-weight ratio than any other wheel in the industry. The Signature™ Premium Wheel is excellent for floor protection, continuous towing and noise reduction.

Elastomeric High Tensile Non-Marking Rubber Wheels 700-2,280 lbs.

RWM Elastomeric High Tensile Rubber Wheels are incredible molded rubber wheels. The high quality high tensile premium rubber is bonded to a heavy-duty solid web cast iron core. These wheels are rated at 200% more than normal molded rubber wheels. This rubber wheel will not crack, chunk, dry out or debond. These elastomeric high tensile rubber wheels are excellent for towing applications in both indoor or outdoor environments. These rubber wheels can be used at higher rated towing speeds than other wheels. Please contact the factory for additional information.

RWM Elastomeric High Tensile Rubber Wheels provide excellent floor protection, are quiet and roll easily over debris. They will not mark floors. They are an excellent caster for large assembly plants, freight terminals, automotive plants, and continuous use operations.

Mold-On Rubber Wheels (RI) 500-2,800 lbs.

RWM Mold-On Rubber Tread Wheels are constructed by molding high quality rubber to cast iron cores. All RWM Mold-On Rubber Wheels are floor protective, provide long tread life, are quiet in operation and are highly resilient. Mold-on Rubber Wheels are suggested for use on all types of floors and numerous applications. The standard RWM Mold-On Rubber tread is 75 Shore A durometer. Mold-On Rubber Wheels are popular and used in principally inexpensive applications such as trash containers, platform trucks, lumber carts and many manually pushed low cost applications. These wheels should be replaced as soon as they start to crack, chunk or tear apart. They do not handle overloading or towing. Although economical, the RWM Mold-On Rubber Wheel utilizes a higher-grade rubber tread material that significantly outperforms wheels produced by other manufacturers.

75 Shore A Durometer

Temperature Range: -40 to +160° Fahrenheit

Elastomeric High Tensile Rubber Wheels 1,080-2,280 lbs.

RWM Elastomeric High Tensile Rubber Wheels are incredible molded rubber wheels. The solid core provides superior strength and the rubber does not chunk out. These rubber wheels perform well at 200% of normal molded rubber capacity and are excellent for towing applications. These elastomeric high tensile rubber wheels may mark floors. These lighter rubber wheels reduce the weight of carts and increase amount of loads that carts can carry. RWM Elastomeric High Tensile Rubber Wheels may be the best all purpose towing wheel in the industry.

Pneumatic Wheels (FN) 300-3,360 lbs.

RWM Pneumatic Wheels provide smooth, shock-resistant operation for delicate instruments and breakable components. Pneumatic wheels are suggested for indoor and outdoor use where product protection is required. Pneumatic wheels offer the maximum in floor protection and move freely over obstructions and rough floors.