Heavy Duty Kingpinless™ Casters
Standard Top Plate
Swivel Sections and Cross Sections
KINGPINLESS™ CASTER SWIVEL SECTION
RWM’s 125 Series features the patented Kingpinless™ caster design. This is the design that RWM patented, and that has proven itself to be the best solution for demanding applications. This is the caster design that all others are now copying because it is simply unmatched in extending service life and reducing all possible causes for caster failure. The 125 Series offers capacity up to 40,000 pounds. Typical applications include ground support equipment, die carts, and aircraft engine stands. Leg thickness of 1/2" adds extra strength and durability. All swivel sections are supplied with a lubrication fitting for field maintenance.
Our 125 Series Casters are proudly made in the USA! Log in below to download CAD drawings of this caster.
Raceway Design: Patented Kingpinless™ single ball bearing precision machined raceway hardened to 53 Rockwell C Minimum, 7" diameter raceway with 3/4" diameter ball bearings
Capacity: 40,000 lbs. Larger, higher capacity raceways are available. Contact factory for more information.
Finish: Laguna Blue powder coat
Wheels: Wheels are either 3", 4", 5" or 6" wide depending upon wheel size and type. Wheels have either a 3/4", 1", 1-1/4" or 1-1/2" roller bearing or 3/4", 1", 1-1/4" tapered wheel bearings. Roller bearing wheels rotate on a hardened and ground spanner, tapered wheel bearings rotate on the axle. All wheels are equipped with lubrication fittings.
Mounting Plate Size: 8-1/2" x 8-1/2" x 1/2"
Bolt Hole Spacing: 7" x 7"
Mounting Bolt Diameter: 5/8"
DSL: Demountable Swivel Lock - When ordering the Demountable Swivel Lock (DSL),
you must also order the Notched Yoke (NY).
HDSL: Heavy Duty Demountable Swivel Lock
FCWB: Face Contact Wheel Brake
HT: High Temperature Lubrication
LT: Low Temperature Lubrication
NY: Notched Yoke
PCWB: Poly Cam Wheel Brake
SL: Swivel Lock
SR: Sealed Swivel Raceway
WS: Wheel Seals
ZP: Zinc Plated
HTP:High Temperature Paint
8SL:8 Position Swivel Lock
Benefits of Kingpinless™ Raceway
Our patented offset precision-machined raceway exerts radial force evenly where there is full contact between the ball bearing and the raceway. RWM's unique design adds more mass at key points. This, plus more thorough heat treatment, provides additional strength and combats brinelling into the core material.
- No direct "hammering" forces on the intersections of the raceways
- Vastly reduced raceway wear
- Elimination of the "pull apart" forces of stress in the swivel section
- Smoother swiveling action
- High maneuverability
- Longer service life
- Less maintenance
- Extra impact resistance
- High radial force absorption
Optional Mounting Plates
|Optional Top Plate Number
||Bolt Hole Spacing
||8-1/2" x 11"
||7" x 9-3/4"